CONTENTS
QUICK START
Please read the entire manual to gain a full understanding of the Mini-B vehicle, fine-tuning the setup and performing maintenance.
1. Read the safety precautions found in this manual.
2. Charge the battery. Refer to the included charging warnings
and instructions for battery charging information.
3. Ensure the transmitter and receiver is bound before installing the following
components. Please refer to the binding instructions of your
transmitter's manual.
4. Install a Receiver
5. Install a Steering Servo
6. Install a Motor/ESC combo.
7. Install a fully charged battery in the vehicle.
8. Power ON the transmitter and then the vehicle. Always power the transmitter
ON before the vehicle and power it OFF after the vehicle has been
powered OFF.
9. Check the steering and throttle control directions. Verify that the servos
are moving in the correct direction.
10. Drive your vehicle.
11. Perform any necessary maintenance.
INCLUDED
REQUIRED
COMPONENTS
RECOMMENDED COMPONENTS
PART
NUMBER
Losi
®
Mini-B Roller
2+ Channel Radio Control System
Spektrum DX5C DSMR 5CH TX Only, SR315 Receiver combo
SPM5115C
High Torque Steering Servo with 20T Output
Gear
Spektrum™ SX107 Micro Analog Metal Gear Surface Servo
SPMSSX107
Motor / ESC
Dynamite
®
Brushless Motor/ESC 2-in-1 Combo, 6000Kv: Mini-T 2.0
DYNS0501
Pinion
18T
See parts list
2S Hardcase LiPo Battery
Spektrum 7.4V 800mAh 2S 50C Hardcase LiPo with EC2
DYNB825H2
Charger
Spektrum SMART S1200 DC Charger, 1x200W
SPMXC1000
3
EN
LOSI MINI-B 2WD BUGGY PRO ROLLER • INSTRUCTION MANUAL
EN