Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
Fax +32 2 359 95 50
! BEFORE USING THE IRON, remove any labels from the soleplate and wipe any manufacturing
residue from the soleplate using a soft cloth
.
FILLING THE WATER TANK
Use tap water only. Distilled or demineralised water makes the anti-calc system inefficient. If
you want to use the steam dial, fill the water tank as follows:
1)
Unplug the iron from the outlet to let it cool down and set it horizontally on a stable level
surface.
2)
Turn the temperature dial to
"
MIN
" and the variable steam dial to the
setting.
3)
To fill the water tank, open the lid of the filling opening downwards and pour water
through the fill opening using a measuring cup. Never exceed the MAX mark indicated on
the appliance. Then close the lid.
4)
When ironing, unplug the appliance before refilling. Fill the water tank by holding the
appliance in horizontal position without putting down the hot soleplate, unless you have a
heat-resistant base.
TEMPERATURE SETTINGS
•
You can choose the temperature setting in function with the cloth to iron.
•
In order to turn the iron on, please turn the temperature knob clockwise into the required
position (see table below). If you are in doubt, take a look at the garment label. The colour
of the iron tank changes according to the different temperatures.
MIN
blue
green
orange
violet
MAX
red
DRY PRESSING
•
Turn the variable steam dial to position
.
•
Plug in the iron.
•
Set the temperature dial for the desired fabric. Always check the label of the garment
before choosing the temperature setting.
•
Set the iron on its heel rest and wait until the temperature indicator light goes out.
10
TKG SI 12 - 091012
Assembly page 10/48
