background image

Radio

The TeCom-X5 has a radio function. Via software, 25 radio frequencies can be stored. It is also

possible to manually select frequencies via the keypad.

To turn on / off the radio, press the F-key (keypad, lower row, right), followed by the FM key (num-

ber 8). In the fixed channel mode, the actual radio channel number is displayed above the frequen-

cy, provided that channels have been programmed.

To switch between manual frequency mode and fixed channel mode press the V/M key (keypad,

lower row, left).
Manual Frequency Mode:

The wanted radio station within the frequency range of 70 MHz to 107,9 MHz, can be directly ente-

red via the keypad. It is also possible to step to the wanted frequency in 10-kHz steps with the Up

/ Down

(3) keys.

To find an occupied radio station the scan function can be used. Start the scan function by pressing

the F-key (keypad, lower row, right), followed by the SCAN-key (number 3). The display reads SCN.

UP until an occupied channel has been found. The active scan function is indicated by a blinking

dot next to the letter N.

To stop scanning press any key.

Zum Auffinden einer besetzten Radiofrequenz steht ebenso die Suchfunktion zur Verfügung.

Starten Sie den Suchlauf durch Drücken der Sperrtaste (Tastenfeld unten rechts) gefolgt von der

SCAN-Taste (Tastennummer 3). In der Anzeige erscheint solange SCN. UP bis ein besetzer Kanal

gefunden wurde. Der aktive Suchlauf wird durch einen blinkenden Punkt neben dem Buchstaben N

angezeigt. Zum Abbrechen der Suchfunktion irgendeine Taste drücken.

MENU

General settings that can be altered directly via the radio are organized in the menu.
Follow these steps to change a setting:
1. To open the menu press the F-key (keypad, lower row, right), followed by the SEL key (number 9).

2. Select the wanted function with the Up

/ Down

keys (3).

3. To access the available settings for the selected function, press the F-key (keypad, lower row, right).

4. Select the wanted setting with the Up

/ Down

keys (3).

5. To confirm your selection and continue in the menu press the F-key (keypad, lower row, right).

To confirm and leave the menu press the V/M key (keypad, lower row, left).

If no key is pressed within 10 seconds, the selected settings will be automatically stored and the

the menu will be left.

These functions are available.

01 APO

Automatic Power-Off

Settings : Off, 1 - 15 H (hours)

The radio will automatically power off after the set time

Summary of Contents for PR8056 TeCom-X5 PMR
















Reviews: