Warranty and Service
Profiles Preset
10 Sets of profiles can be programmed and stored in the ESC. The factory default settings are all MODIFY
preset which can be used for modified class racing. The racer can pre-program 10 different sets of profiles
according to his needs and the data can be called out at any time without any extra special programming.
Section
Program Item
Description
Running Mode
Forward / Brake • Forward / Brake / Reverse • Forward / Reverse
Motor Direction
Normal
Reverse
ESC Overheat Protection
85°C / 185°F 105°C / 221°F
125°C / 257°F Disable
Motor Overheat Protection
85°C / 185°F 105°C / 221°F
125°C / 257°F Disable
BEC Voltage
6.0V
Reverse Speed
25% - 100% • 1% Increments
Voltage Cut-Off
6.0V - 25.0V • 0.1V Increments
Auto Cut-Off • 3.2V Cell
Throttle
Settings
Throttle Input Curve
Linear
Custom
Punch Rate Switch Point 1% - 99% • 1% Increments
1st Stage Punch Rate
1 - 30 • 1 Increments
2nd Stage Punch Rate
1 - 30 • 1 Increments
Throttle Dead Band
0.002 - 0.150ms
Brake
Settings
Brake Input Curve
Linear
Custom
Drag Brake
0% - 99% • 1% Increments
Brake Strength
0% - 99% • 1% Increments
Initial Brake
= Drag Brake
0% - 50% • 1% Increments
Brake Rate Switch Point
1% - 99% • 1% Increments
1st Stage Brake Rate
1 - 20 • 1 Increments
2nd Stage Brake Rate
1 - 20 • 1 Increments
Turbo
Timing
Settings
Turbo Timing
0 deg° - 15 deg° • 1° Increments
Turbo Activation Method
Full Throttle
Rpm
Full Th Rpm
Turbo Full Throttle Delay
0.05 - 1.00 Sec • 0.01 Sec Increments
Turbo Engage Slope
1 deg°/0.1S - 64 deg/0.1S° • 1° Increments
Section
Program Item
Description
Running Mode
Forward / Brake
Motor Direction
Normal
ESC Overheat Protection
105°C / 221°F
Motor Overheat Protection
105°C / 221°F
Reverse Speed
25%
Voltage Cut-Off
Auto Cut-Off • 3.2V Cell
Throttle
Settings
Throttle Input Curve
Linear
Punch Rate Switch Point
50%
1st Stage Punch Rate
3
2nd Stage Punch Rate
3
Throttle Dead Band
0.080ms
Throttle Status
Brake
Settings
Brake Input Curve
Linear
Drag Brake
10%
Brake Strength
75%
Initial Brake
Drag Brake
Brake Rate Switch Point
50%
1st Stage Brake Rate
10
2nd Stage Brake Rate
16
Turbo
Timing
Settings
Turbo Timing
0°
Turbo Delay
0.10 Sec
Turbo Start RPM
20.000 Rpm
Turbo Engage Slope
15° / 0.1Sec
INSTRUCTION MANUAL
REVOC PRO 160
ESC programming
The ESC can be programmed by the TC Smart Box or by the PC using the TC Wif-Fi module.
Programmable Settings
Profile One (1) Setting Values (Default)
For 1/8 Off-Road, Sensored motor TC Dynotorq 815-4P 2350KV 4S Lipo
Trouble Shooting
Important;
If you set the cut-off voltage manually, please note the adjustable voltage is TOTAL cut-off voltage of the
battery pack. In AUTO mode, the default cut-off voltage is 3.2V per cell.
• The output power of the motor will be improved when you adjust the motor timing. Electronic motor
timing will increase the temperatures of ESC and the motor. Please be carefull when setting up and testing
your application to avoid overloading ad overheating. Incorrect Boost and Turbo timing setting may cause
permanent damage to the ESC and motors.
• The program items and setting selections vary due to different programming methods.
Problem
Cause
Solution
ESC sounds like B-B-B-...
No signal from transmitter Check the signal wire, connector and trans-
mitter
ESC sounds like BB-BB-BB-...
Low voltage protection
Change battery
ESC sounds like BBB-BBB-BBB-...
ESC overheat protection
1. Add ESC or Motor cooling fan
2. Let ESC cool down
3. Reset the ESC temperature overheat
protection
ESC sounds like BBBB-BBBB-BBBB-...
Motor overheat protection 1. Add ESC or Motor cooling fan
2. Let ESC cool down
3. Reset the motor temperature overheat
protection
ESC/Motor protection occurs even the
temperature overheat protection is set
at 125°C / 257°F
The power system is over-
loaded due to over gear
ratio, over motor Rpm or
over timing settings
1. Adjust the gear ratio
2. Change Motor
3. Reset the timing
If material defects or manufacturing faults should arise in a product distributed or manufactured by Team Corally, a division
of JSP Group Intl BVBA, and purchased by a consumer, we Team Corally acknowledge the obligation to correct those faults
or defects within the limitations described below. This manufacturers warranty is in addition to, and does not affect, the
legal or contractual rights of the consumer which arise from the purchase of such products. Team Corally guarantees the
consumer that its products are free from material, manufacturing, and construction faults, as determined by the general
state of knowledge and technology valid at the time of manufacturing. The fault responsible for causing the damage must
be proven to have been present in the product at this time. Claims for compensation arising from consequential damage
or product liability will not be considered valid unless they fall under peremptory provisions of the law. If material defects
or manufacturing faults should arise in a product distributed or manufactured by Team Corally in the European community
(EC) and purchased by a consumer, then Team Corally undertakes to correct those defects within the limitations described
below.
This manufacturer’s declaration does not affect the consumer’s legal or contractual rights regarding defects arising from
the purchase contract between the consumer and the dealer or reseller.
Extend of the Warranty
If a claim is made under warranty, we take at our discretion to repair or replace the defective goods. We will not consider
supplementary claims, especially for reimbursement of costs relating to the defect (e;g. installation / removal costs) and
compensation for consequent damages unless they are allowed by statute. This does not affect claims on legal regula-
tions, especially according to the product liability law.
Provisions of the Warranty
The purchaser is required to make the warranty claim in writing, and must enclose original proof of purchase (e.g. invoice,
receipt, delivery note) and the appropriate warranty card. He must send the defective goods to our
local represen-
tatives or directly to Team Corally, a division of JSP Group Intl BVBA, Geelseweg 80, 2250 Olen,
Belgium at his own risk and cost.
The purchaser should state the material defect or manufacturing fault, or symptoms of the fault, as accurate as possible,
so that we can check if our warranty obligation is applicable. The goods are transported from the consumer to us, and
from us to the consumer, entirely at the risk and cost of the consumer.
Invalidation of the Warranty
The consumer cannot make a claim under warranty when the fault is affecting the use of the product arising from nat-
ural wear, competition use, or improper use (including installation) or external forces. The consumer’s adherence to the
building and operating instructions relevant to the model, including the installation, operation, use of, and maintenance
of, model-related components cannot be supervised by Team Corally. Therefore Team Corally is in no way liable for loss,
damage, or costs resulting from improper use, or behavior in any way connected to the above described provisions. Unless
otherwise required by law, Team Corally is in no way whatever liable to provide compensation for damages arising from
the improper use of the model (including personal injury, death, damage to buildings, loss of turnover, loss of business, or
interruption of business, or any other direct, or indirectly caused, consequential damage).
Duration of Validity
The claim period is 24 months from the date of purchase of the product by the consumer from a dealer in the European
Community (EC) counted from the date of purchase. The claim period is 12 months from the date of purchase of the
product by the consumer from a dealer outside the European Community (EC) counted from the date of purchase. If a
defect arises after the end of the claim period, or if evidence or documents required according to this declaration in order
to make the claim valid are not presented until after this period, then the consumer forfeits any rights or claims from this
declaration. The guarantee period is not prolonged by the granting of any claims within the framework of this warranty,
especially in the case of repair or replacement. The guarantee period also does not restart in such cases.
Warranty Expiration
If we do not acknowledge the validity of a claim based on this declaration within the claim period, all claims based on this
declaration will expire after six months from the time of registering the claim; however this cannot occur prior to the end
of the claim period.
Applicable Law
This declaration, and the claims, rights and obligations arising from it, are based exclusively on the pertinent Belgium Law,
without the norms of international private law, and excluding UN retail law. Place of fulfillment for liabilities arising from
this declaration is Olen, Belgium. Court of jurisdiction is Turnhout, Belgium.
Copyright
This manual is protected by a copyright. Any publication, transmission or commercial use of this manual is prohibited
without written permission. Team Corally and JSP Group Intl BVBA assumes no responsibility for printing errors in this
manual. This manual is subject to technical changes.
WEEE:
At the end of this device’s useful life, please remove all the batteries and dispose of them
separately. Take electrical appliances to the local collection points for waste electrical and elec-
tronic equipment. Other components can be disposed of in domestic refuse.
Thank you for your co-operation!
Declaration of Conformity
Team Corally REVOC PRO 160 Controller
Declaration of conformity in accordance with the statutory rules 426/2000
and directive 1999/5/EC (R&TTE)
Team Corally, a division of JSP Group Intl BVBA declares under sole responsibility that the electronic speed
controller
Revoc 160 Pro
with reference nr C-53004 to which this declaration relate, conforms with the following
harmonized standards and EU legislations;
EN 60950-1 ed. 2
EN 61000-6-3 ed. 2
Olen - Belgium
12 March 2016
Stefan Engelen
Ceo
Page 5
Page 6
Page 7
Page 8
Team Corally
Geelseweg 80
2250 Olen
Belgium
Tel: +32 14 25 92 94
[email protected]
