Team Corally RACE 60, Instruction Manual, Page: 7 / 32

7
WARNING AND SAFETY NOTES
These warnings and safety notes are particularly important.
Please follow the instructions for maximum safety; otherwise the charger and the
battery can be damaged or at worst it can cause a fire.
Never leave the charger unattended when it is connected to its power supply. If any
malfunction is found,
TERMINATE THE PROCESS AT ONCE
and refer to the operation
manual.
Keep the charger well away from dust, damp, rain, heat, direct sunshine and vibration.
Never drop it.
The allowable AC input voltage is 100~240V AC
This charger and the battery should be put on a heat-resistant, noninflammable and non-
conductive surface. Never place them on a car seat, carpet or similar.
Keep all the inflammable volatile materials away from operating area
.
Make sure you know the specifications of the battery to be charged or discharged to
ensure it meets the requirements of this charger. If the program is set up incorrectly, the
battery and charger may be damaged .It can cause fire or explosion due to overcharging.
Battery
Type Fast Charge
Rate
Nominal Cell
Voltage
Max. Charge
Voltage Cell
Min. discharge
Voltage Cell
Storage
Voltage Cell
Ni-Cd 1 - 2C 1.2V 1.5V 0.85V
Ni-MH 1 - 2C 1.2V 1.5V 0.85V
Li-Ion <= 1C 3.6V 4.1V 2.5V 3.7V
Li-Po <= 1C 3.7V 4.2V 3.0V 3.8V
Li-Po HV <= 1C 3.8V 4.35V 3.3V 3.9V
Li-Fe <= 4C 3.3V 3.6V 2.0V 3.3V
PB <= 0.4C 2V 2.46V 1.75V
Standard Battery Parameters
Be very careful to choose the correct voltage for different types of battery otherwise you
may cause damage to the batteries. Incorrect settings could cause the cells to fire or
explode.