Team Blacksheep TBS UNIFY EVO, Manual

Page: 2 / 14

Specifications
TBS UNIFY EVO
Input voltage: 7V to 26V (2S - 6S LIPO) VBat, peak max 31V.
Connect directly to battery or regulator with enough output power (>=7V, 1A)!
Power Output Regulated 5V for Camera @ 200mA
Extra features: CleanSwipe
PitMode
2x CRSF
Smartaudio V2.1
Remote software
protocol PWM, Barcodes, 2x CRSF or
SmartAudio V2.1
Output Power CRSF:
14dBm (25mW)
20dBm (100mW*)
26dBm (400mW*)
29dBm (800mW*)
Smartaudio V2.1:
14dBm (25mW)
23dBm (200mW*)
27dBm (500mW*)
29dBm (800mW*)
Pit mode Activate: ​ press button during powered up.
LED: ​ red blinking
Deactivate:
​
press button during powered up.
LED: ​ blue
( ​ red ​ & ​ blue ​ when unlocked)
Pit mode -> flight mode Command through Smartaudio V2.1 & CRSF
Channels:
Band A (8ch), B (8ch), E (5ch)
Fatshark 8ch
Race Band 8ch
Low Race Band 8ch **
Audio Yes, through microphone on-board
Power consumption 25mW: 300mA
200mW: 370mA
500mW: 500mA
800mW: 650mA
25mW: 300mA
100mW: 350mA
400mW: 450mA
800mW: 650mA
Range: Up to 4 km with omnidirectional RHCP antennas
Antenna connector: U.FL high strength
SMA
Port connector Main connector: JST-GH, 7 pin
2 ​ nd ​ Connector: JST-GH, 4 pin
Dimensions: 22 (H) x 30 (W) x 4 (D) mm
Weight: 7g excluding antenna
Kit contents: 1x TBS UNIFY EVO, 1x 7pin cable (power, cam, crsf), 1x 4pin cable
* requires HAM license, special unlocking procedure!
2