Hardware
Configure all the installed input sticks, switches, and
buttons
●
Calibration - Starts the stick calibration
●
Sticks - Perform the calibration of the
hall-effect magnetic gimbals
●
Switches - Sets the type of switches
●
Battery calibration - Use a multimeter to
measure and input the voltage
●
RTC battery - shows the actual RTC battery
voltage
●
Check RTC - checks the voltage of the RTC
battery
Version
Current build and version of the OpenTX firmware
●
As the TANGO II is a branch of the OpenTX
codebase it needs its specific build
●
Firmware Options - shows the included
software modules
17
