Channel 1
(57
3
5 MHz)
Channel 5
(5805 MHz)
Channel 2
(5745 MHz)
Channel 6
(5825 MHz)
Channel 3
(5765 MHz)
Channel 7
(5845 MHz)
Channel 4
(5785 MHz)
Channel 8
(5865 MHz)
Antenna Positions
Place your antenna as far away from electronic and metal components as possible. Any metallic surface
will reflect radio waves and reduce your range. Position the video transmitter flat, so that the antenna is
pointing vertical up or down. The antenna must be protected from crash damage. If the antenna is bent
the video link will no longer work at the exceptional ranges as before.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
