SETTINGS
RGB MODE
RGB mode can be set by the help of RGB/VGA Switch (7). When it’s in position 1, it displays 15khz
RGB video, or 480i. If you change it to position 2, it will display 31khz VGA video or 480p. Some
games are not compatible with the VGA mode, and the console checks the type of cable plugged
while booting, so it refuses to boot if the game doesn't support the VGA mode. To eliminate this
problem you can trick the console while booting(after the beep sound) by switching to position 2
(VGA mode). This can work on most of the games, however some games still may not support it,
please check the incompatibility list on the web.
SCANLINES ON/OFF
Scanliner function can be turned on or off by the ON/OFF switch (8). When it’s in position 2,
scanlines will be displayed, when it’s switched to position 1, scanlines won’t be displayed.
This feature can be used on the fly, however it’s recommended to do it while the console is turned
off.
EVEN / ODD SCANLINES
EVEN/ODD switch (9) is used for selecting either even scanlines to be displayed or odd ones
according to your preferences.
VIDEO SYNC MODE SELECTION
Sync mode on the VGA connector can be selected by a push button (10) on the board. You need to
remove the 4 screws on top cover to be able to reach this button. You can choose CSYNC (for RGBS)
by pushing the button, when it latches, it will output CSYNC. When you push it again, by releasing
the button, it will output RGBHV through the VGA connector.
BONUS MODE : LUMINOSITY ADJUSTMENT
As a bonus feature, while the EVEN/ODD switch is set to position 1, and the scanlines are turned off
(position 1) Toro can display a darker image without scanlines and when the EVEN/ODD switch is set
to position 2 again, it will display in its normal brightness.
5
