REAR SHOCK MOUNTING
Add the #6473 bushings as shown.
Push cap over bushing and add #6222
locknut. Do not overtighten or the shock
will bind.
Fasten the lower shock with the #6918
screw into the arm outer hole.
FRONT SHOCK MOUNTING
Add the #6473 bushings as shown.
Push cap over bushing and add
#6222 locknut. Do not overtighten or
the shock will bind.
Fasten the lower shock with the #6918
screw into the arm inner hole
Do the other front shock.
6222, qty 4
4-40/5-40
locknut
B A G F
REMOVE THESE
PARTS FOR:
Steps 7-8
6918, qty 4
4-40 x 1/2
6473, qty 4
shock bushing
1:1
1:1
1:1
B A G G
9180, qty 1 ea
servo horns
1:1
ASSEMBLE THE SERVO
Find the approporiate #9180 servo horn for your servo,
marked "A" for Airtronics, "F" for Futaba, "J" for JRPropo, and
"H" for Hitec. Remove the servo horn from your servo and
replace with the #9180 horn, then fasten with the stock
mounting screw.
Install the #6270 ball end into the servo horn. Add the #6272
dust cover.
Attach the #7336 mounts with the #6917 (6860*) screws and
#7337 washers. Add the #7336 spacers if you have an
Airtronics servo.
6270, qty 1
ball end
6272, qty 1
dust cover
7336, qty 2
servo mount
7336, qty 2
servo mount
spacer
7337, qty 4
washer
1:1
1:1
T O O L S U S E D
T O O L S U S E D
s t e p 1
s t e p 7
R I G H T S I D E
s t e p 8
R I G H T S I D E
1/16", 3/32"
1/16"
17
REMOVE THESE
PARTS FOR:
Step 1
9180
7336
7337
6917,
6860*
7336
use spacers with
Airtronics servo
6272
6270
7336
7336
7337
use spacers with
Airtronics servo
1
4
BASIC, SPORT, TEAM ONLY
6917, qty 4
4-40 x 3/8
OR
FACTORY TEAM ONLY
6860*, qty 4
4-40 x 3/8
1:1
1:1
6917,
6860*
stock mounting
screw
