TeachLogic VoiceLink I, Owner'S Manual

Page: 16 / 28

owner’s manual
10
VoiceLink I
corner mounting below ceiling
corner mounting on ceiling T-bar
•
Locate sensor near ceiling, within 12 inches is
preferred
•
Screw bracket into corner
•
Slide sensor onto bracket with LED oriented
either at 12 o'clock or 6 o'clock (top or bot-
tom) and sensor cable oriented at 3 o'clock or
9 o'clock.
•
Connect sensor cable and route in tidy manner
to receiver
•
Plug into either sensor input on receiver
•
Lift up corner ceiling tile
•
Set bracket on corner of T-bar
•
Lower ceiling tile to secure bracket in place
•
Slide sensor onto bracket with LED oriented
either at 12 o'clock or 6 o'clock (top or bot-
tom) and sensor cable oriented at 3 o'clock or
9 o'clock
•
Connect sensor cable and route in tidy manner
to receiver
•
Plug into either sensor input on receiver
A second sensor is included standard with the system for
added wireless transmission coverage. See illustration
next page.
note
T-Bar
Ceiling Tile
T-Bar
Ceiling Tile
installation of two IWS-35 corner sensors
The corner sensor is a critical component of the system for reliable operation of the wireless
transmitter. It receives the infrared signal and sends it to the receiver/amplifier. Its location
is very important. Corner installation provides the best performance. The receiving pattern
of the sensor is like an elliptical shape cone about 90º horizontal by 60° vertical. The reliable
operating distance from transmitter to sensor is about 35 feet.