Page 2
™
Wind Lift
Copyright 2012, TeacherGeek Inc. System Patent Pending.
Step #1
Step #2
Holes & Reaming
Components
come with holes
that dowels press
securely into.
Push, Wiggle, Tap
Reaming holes to allow
dowels to rotate and slide
freely.
Ream
Turn a reamer back and
forth through a hole.
Push dowels into holes by:
1. Wiggling and pressing with your hands
2. Tapping dowels with a hammer or the
side of your cutter.
Tip: Rub a dowel
with soap, wax or a
crayon to allow it to
slide easier into and
out of holes.
Start Building!!!
Most holes should not be reamed. Do not ream
holes which dowels should stay pressed into.
WARNING!!!
3rd Hole
3rd Hole
6th Hole
Top View:
Bottom View:
Place two perpendicular
blocks onto the ends of two
300mm (12in) dowels.
Attach two perpendicular blocks to a hole plate
using two #10 screws and two #10 nuts.
Do not ream
any holes.
Do not ream
any holes.
#10
Screw
#10 Nut
Perpendicular
Block
Hole Plate
300mm (12in)
300mm (12in)
