© TeacherGeek Inc. 2016. Wiggle-Bot supplies @ TeacherGeek.com R2.1
Quick Start
1 Motor with Holder & Leads
Colors will vary.
Tape
2-4 Markers
1 AA Battery
Large Paper or
Poster Sheet
Get Ready...
What You Have
What You Need
Page 1
Scissors
Optional...
Something to Cut
Strips & Dowels
TeacherGeek Multi-Cutter
Recycling Bin &
Other Materials
1. Bend
Bend up the leads
on the motor holder.
Turn the motor
on and off by connecting
and disconnecting leads.
Make sure wires go through
the motor mount. If they
don’t, they will break off.
Battery
This is a real engineering project (not a toy). What does that mean? You get to design and build
your own unique Wiggle-Bot, rather than just following directions. You’ll also get to cut, wire and
maybe even pound. Experiment and try different ideas. Keep improving and changing your designs.
• Plastic Containers
• Bottles & Caps
• Plastic Utensils
• Boxes
• Other Things
Put a battery in the holder
and connect the leads.
Battery
Put the battery into the
holder with the flat side
against the spring.
(TeacherGeek Multi-Cutter,
Pruning Shears, Saw)
4. Run
2. Power
Open alligator
clip leads by
pinching.
3. Pinch
Get Set...
+
-
4 Gears
50Tooth, 40Tooth,
20Tooth, 10Tooth
6 Dowels
2 300mm (12in), 2 150mm (6in),
1 75mm (3in), 1 50mm (2in)
2 Steel Wire
300mm (12in)
1 Motor Mount
1 AA Battery Holder
t el Wire
2 Perpendicular Blocks
Materials in the TeacherGeek 1823-17 Wiggle-Bot Kit
