o
The illustration below shows the polarity of the signal
in relation to the direction of the load.
c
3
c
3
Polarity (load direction and output)
Tension
+
Compres
sion
−
o
If the load receiving area is contacted by something that
is at a different temperature and the load is increased,
the values output by this device could become unstable,
making accurate measurement impossible.
In such a case, wait until the temperature difference
ceases to exist before measuring.
Electrical connection of load cell
o
Connect as shown in the illustration below. Incorrect
connections could result in inability to balance and
in errors occurring in the output voltage when loads
are applied.
Using a cable with bare lead wires
Red
Input (+)
Black
Output (−)
Blue
Input (−)
White
Output (+)
Yellow Shield
o
This unit does not support remote sense.
See the operation manuals of indicators and strain
amps that support remote sense for how to connect
sensors with those units.
o
The shield is not connected to the main body of this
product. For this reason, if grounding is necessary
because of external noise or another issue, arrange to
ground the shield to a part other than the body of this
unit, for example.
o
Since the cable is directly connected to this unit, use
a specialized cable to increase the length. (Please
consult with us.)
Using a connector (optional)
A Input (+)
B Output (−)
C Input (−)
D Output (+)
E Shield
NDIS-compatible connector
Handling after use
o
When moving this unit while it is attached, take protective
measures to prevent it from being shaken or subjected
to excessive external forces.
o
When storing it, keep it in a dry place where it will not
be exposed to water or oil, for example.
Specifications
Rated capacity: 200 N, 500 N, 1 kN, 2 kN, 5 kN, 10 kN, 20 kN
Safe overload rating: 150% R.C.
Rated output: 3 mV/V ±1%
Linearity: 0.05% R.O.
Hysteresis: 0.05% R.O.
Repeatability: 0.03% R.O.
Zero balance: ±10% R.O.
Safe excitation voltage: 20 V
Input terminal resistance: 350 Ω ±3.5 Ω
Output terminal resistance: 350 Ω ±5 Ω
Insulation resistance: 1000 MΩ or more (DC 50 V)
Compensated temperature range: −10 to 70°C
Permissible temperature range: −30 to 80°C
Temperature effect on zero balance: 0.05% R.O./10°C
Temperature effect on output: 0.05% R.C./10°C
Cable: Ø6mm 4-core shielded cable, 5m direct connection
with bare lead wires
Body material: aluminum
Environmental compliance: RoHS (10 substances)
Dimensional drawing
B
A
2-G
（−）
（＋）
C
D
E
F
(17)
Dimensions in
millimeters (mm)
Load direction
Rubber
sleeve
Cable
Rated
capacity
A
B
C D
E
F
G
200 N
56 60 28 20 44
60
M6x1, depth 12
500 N
1 kN
2 kN
70
M12x1.75, depth
16
5 kN
10 kN
20 kN 70 74 33 25 58 90 M16x2, depth 20
Warranty explanation
o
The warranty period for this device is one year from
the date of purchase.
o
Be aware that repairs will require payment in the following
cases even during the warranty period.
1) Malfunction or damage due to misuse
2) Malfunction or damage caused by modifications
or repairs conducted by any party other than our
company or a service person designated by our
company
3) Malfunction or damage caused by dropping, trans-
portation or similar handling after product delivery
4) Malfunction or damage caused by fire, earthquake,
water, lightning or other natural disaster
5) Malfunction or damage caused by external factors,
including power supplies and equipment environ-
mental conditions, that deviate from the operation
requirements of this product
6) Malfunction or damage if the product was not pur-
chased from our company or an agent designated
by our company
o
We offer paid service after the conclusion of the warranty
period. For details, please contact the retailer where you
purchased the unit.
o
Be aware that our company will bear no responsibility
for any secondary damages resulting from the operation
of this device or related to data.
o
Information is given about products in this manual
only for the purpose of example and does not indicate
any guarantees against infringements of third-party
intellectual property rights and other rights related to
them. TEAC Corporation will bear no responsibility for
infringements on third-party intellectual property rights
or their occurrence because of the use of these products.
Contact information
TEAC CORPORATION (Manufacturer)
1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan
Phone: +81-042-356-9154
TEAC AMERICA, INC.
10410 Pioneer Blvd. Unit #1, Santa Fe Springs, California 90670,
U.S.A.
Phone: +1-323-726-0303
TEAC EUROPE GmbH. (EU Importer)
Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany
Phone: +49-611-7158-349
TEAC UK Limited (UK Importer)
Luminous House, 300 South Row, Milton Keynes,
Buckinghamshire, MK9 2FR, UK
Phone: +44-1923-797205
0223 MA-3627A
