Teac TD-SC1, Instructions For Use Manual

Page: 30 / 64

30
6-6-6. Hold function settings
Group Setting name
Command
No.
R/W Default value
Command data (setting
value)
Operation
explanation
Hold Mode 4001 R/W 1: SAMPLE
0: OFF
page 49
1: SAMPLE
2: PEAK
3: BOTTOM
External Hold Mode 4004 R/W 0: Level
0: Level
page 55
1: Pulse
Clear Signal 4005 R/W 1: Enabled
0: Disabled
page 55
1: Enabled
Zone Definition 4006 R/W 0: OFF
0: OFF
page 55
1: ON
Auto Zero 4007 R/W 0: OFF
0: OFF
page 55
1: ON
6-6-7. System settings
Group Setting name
Command
No.
R/W Default value
Command data (setting
value)
Operation
explanation
Setting Value Memory 5002 R/W 0: Memory 1
0: Memory 1
page 56
1: Memory 2
2: Memory 3
3: Memory 4
Save All Setting Values 5003 W 90 page 56
Device Information
Device Name 5010 R
“TD-SC1 ” 16-byte (characters
first, followed by spaces)
page 56 Communication Option 5012 R
0: DA
1: EtherNet/IP
2: CC-Link
3: RS-485
Version 5020 R
“1.00 ” 6-byte (characters first,
followed by spaces)
Lock
Calibration Value Lock 5201 R/W 0: OFF
0: OFF
page 56
1: ON
Setting Value Lock 5202 R/W 0: OFF
0: OFF
1: ON
Main Unit Operation Lock 5203 R 0: OFF
0: OFF
1: ON
Device Number 5500 R/W 0000 0000 to 9999 page 56
6. RS-485