Teac T-R610, Owner'S Manual, Page: 14 / 88

14
Set the stop time minutes by using the TUNING buttons
(
‡
/
°
), and press the ENTER button.
5
Select a source by using the TUNING buttons (
‡
/
°
),
and press the ENTER button.
6
Each time the TUNING buttons (
‡
or
°
) are pressed, the
source is changed as follows:
< Do not select “CD”, “TAPE” or ”TUNER-R”, if your CD player
or cassette tape deck connected to the A-R610 does not
support timer controlled playback/recording.
CD TAPE TUNER R(ecording) TUNER
All the units connected via remote control cords will turn on
and off at the specified time every day.
When you don’t use timer, press the TIMER button to
turn it off. (The timer indicator disappears from the
display.)
Press the TIMER button again to turn it on.
Prepare for timer operation.
Adjust the volume of the amplifier, tune in a station, etc.
8
Now the timer setting is stored in memory.
Press the TIMER button.
7
The timer indicator lights on the display.
SLEEP
RDS TUNED
RT STEREO
PTY MEMORY
TIMER
CH. SIGNAL
FM
AM
MHz
K Hz
Setting the Daily Timer 2
SLEEP
RDS TUNED
RT STEREO
PTY MEMORY
TIMER
CH. SIGNAL
FM
AM
MHz
K Hz
SLEEP
RDS TUNED
RT STEREO
PTY MEMORY
TIMER
CH. SIGNAL
FM
AM
MHz
K Hz
Press the STANDBY/ON button of the A-R610 to turn all
the units standby.
9