20
<
The unit can be programmed to turn on
at a specified time. The unit will Standby
after 120 minutes of reaching the
specified time.
<
The unit can be set two different timer
setting separately.
<
Adjust the clock before setting the timer
(see page 11).
Setting the timer
Press and hold the ALARM 1 or
ALARM 2 button for more than 2
seconds.
The clock and the Timer indicator (
or
) blinks on the display.
<
If no button is pressed for about 8
seconds, the timer setting mode will be
canceled.
1
Press the Skip buttons (
.
or
/
)
to set the hour, and then press the
ALARM 1 or ALARM 2 button.
Press the Skip buttons (
.
or
/
)
to set the minute, and then press the
ALARM 1 or ALARM 2 button.
Select a source using the Skip
buttons (
.
/
/
), and then press
the ALARM 1 or ALARM 2 button.
<
To use buzzer, select “
”.
Set the volume using the Skip
buttons (
.
/
/
), and then press
the ALARM 1 or ALARM 2 button.
The volume for timer operation is
adjustable from 5 to 40.
Setting the timer is now completed.
5
4
3
2
Timer
.
/
/
ALARM 1, ALARM 2
