Teac SD-500HR Owner'S Manual Download

Page: 19 / 52

TASCAM DA-3000

3 – Preparations

Connecting/disconnecting USB flash

drives

Connecting USB flash drives

To use a USB flash drive with this unit for playback and dubbing,

insert it into the DEVICE connector on the front of the unit.

NOTE

You can insert a USB flash drive anytime regardless of

whether the power is ON or OFF.

Disconnecting USB flash drives

Turn the power OFF or stop operation before disconnecting a

USB flash drive.

CAUTION

Never remove a USB flash drive when the unit is in use

(recording, playing back, writing data to the drive, etc.).

Doing so could cause recording to fail, recorded data to be

damaged, sudden loud noise to be output from monitoring

equipment, damage to equipment and harm to hearing.

Selecting the media used

Before starting to work with the unit, select the media that you

want to use (SD card, CF card or USB flash drive).
To select the media used, follow these procedures.
1. Press the MENU button to open the

GENERAL

menu screen,

and turn the MULTI JOG dial to select (highlight)

MEDIA

SEL

2. Press the MULTI JOG dial to open the

MEDIA SELECT

screen.

3. Turn the MULTI JOG dial to select the media used, and press

the MULTI JOG dial to confirm the selection.

NOTE

During selection, press the

EXIT/CANCEL [PEAK CLEAR]

button to cancel the selection and return to the menu

screen.

4. The name of the currently selected media appears at the top

right of the Home Screen.

SD card selected

CF card selected

USB flash drive selected

Preparing SD/CF cards and USB flash

drives

You must use this unit to format SD cards, CF cards and USB flash

drives in order to make them usable by the unit.

CAUTION

• Formatting will erase all data on an SD card, CF card or USB

flash drive.

• Always format with this unit. If an SD card, CF card or USB

flash drive is formatted by another device or a computer, it

could affect operation of the unit.

1. Use the MENU button and MULTI JOG dial to open the

MEDIA SELECT

screen and select the media to format. (See

“Selecting the media used” on page 19.)

2. Press the MENU button to open the

MEDIA

menu, and turn

the MULTI JOG dial to select

FORMAT

3. Press the MULTI JOG dial to open the format type selection

pop-up.

4. Turn the MULTI JOG dial to select

QUICK FORMAT

FULL FORMAT

, and press the MULTI JOG dial.

A confirmation pop-up message appears.

NOTE

To cancel formatting, press the

EXIT/CANCEL [PEAK

CLEAR]

button.

5. Press the MULTI JOG dial to start formatting.

While formatting,

– QUICK FORMAT –

– FULL

FORMAT –

appears in a pop-up.

Pop-up when

QUICK FORMAT

selected

6. After formatting completes, the pop-up disappears and the

menu reopens.

Summary of Contents for SD-500HR





















































Search results

Summary of Contents for SD-500HR

Reviews:

Related manuals for SD-500HR

Brands by name

Popular brands

Teac SD-500HR, Owner'S Manual

Search results

Summary of Contents for SD-500HR

Reviews:

Related manuals for SD-500HR

Brands by name

Popular brands