Teac PL-D200V, Service Manual

Page: 74 / 135

89
PIN No. Pin Name I/O Function
46 NC NO CONNECTION
47 GND GND PORT
48 GND
49 FLASH_W2(H) FLASH DOWNLOAD SIGNAL IN/OUT PORT
50 VDD I POWER SUPLY PORT(+3.3V)
51 FLASH_W1(L->H) FLASH DOWNLOAD SIGNAL IN/OUT PORT
52 RDS_CLK O RDS/CLK. OUTPUT PORT
53 VCR_CE I VCR INTERFACE
54 VCC I POWER SUPPLY PORT(+2.8V)
55 DVD_MREQ O DVD INTERFACE(u-COM <--> ESS6028)
56 REMOTE_IN I REMOTE CONTROL SENSOR DATA INPUT
57 VCR_KEY_IN I VCR INTERFACE
58 VCR_DATA_IN I
59 NC NO CONECTION
60 VCR_CLK I VCR INTERFACE
61 VCR_KEY_OUT O
62 RDS_DATA I RDS/DATA. INPUT PORT
63 VCR_POWER_ON O VCR POWER ON/OFF PORT
64~65 NC NO CONNECTION
66 APO_TWARN I DIGITAL INTERFACE(u-COM <-> DDX8000)
67 APO_PWDN O
68 APO_RESET O
69 APO_SDA O
70 APO_SCL O
71~72 NC NO CONNECTION
73 VOLUME - I ELECTRONIC VOLUME UP/DOWN CONTROL
74 VOLUME + I
75 HP_IN I HEADPHONE INSERT SENSING PORT
76 NC NO CONNECTION
77 RESET I u-COM RESET PORT
78 NC NO CONNECTION
79~80 NC
81 GND GND PORT
82 X_IN I 4.19MHz CRYSTAL CONNECTION PORT
83 X_OUT O
84 VCC I POWER SUPPLY PORT(+2.8V)
85~86 NC NO CONNECTION
87 PLL_DATA_IN I PLL DATA INPUT PORT
88 PLL_CE O PLL CHIP ENABLE PORT
89 PLL_CLK O PLL CLK OUTPUT PORT
90 PLL_DATA_OUT O PLL DATA OUTPUT PORT
91 TUNED(L) I TUNED DISPLAY CONTROL PORT("L")
92 STEREO(L) I STEREO DISPLAY CONTROL PORT("L")
93 NC NO CONNECTION
94 FUN_MUTE O FUNCTION MUTE PORT
95~97 NC NO CONNECTION
98 TC9164_STB O FUNC. IC(TC9164) CONTROL PORT
99 TC9164_CLK O
100 TC9164_DATA O