12
In the stop mode, press the PROGRAM CHECK button
repeatedly. The track and program numbers will be shown on
the display.
To check the programed order
Programed Playback
<
Up to 32 tracks can be programed in the desired order.
<
If the shuffle mode is on, the PROGRAM button does not
work.
Press the PROGRAM button in the stop mode.
1
“PROGRAM” lights on the display.
If you want to select a track/file in another disc, press
the corresponding DISC NO. button (1-5).
2
Press the numeric button to select a track or file.
3
Press the PROGRAM button to enter your selection.
4
Repeat steps
to
to program more tracks/files.
<
If you made a mistake, press the CLEAR button. The last
programed number will be deleted.
<
Up to 32 tracks/files can be programed.
4
2
<
Before you press the numeric buttons, “A” is displayed
instead of the track/file number. If you press the PROGRAM
button without pressing the numeric buttons, you can
program a whole disc.
You can also use the SKIP buttons (
.
/
/
) to select a
track.
<
If the unit has not yet detected the contents of the disc, you
can not enter 3-digit numbers with the numeric buttons. In
this case use the SKIP buttons (
.
/
/
).
<
You can not also enter numbers other than those detected as
specifying tracks/files in the disc.
When programing has been finished, press the PLAY
button to start programed playback.
5
When playback of all the programed tracks has finished, or if
one of the following buttons is pressed, the programed
playback stops:
STOP, OPEN/CLOSE
But the programed contents aren’t lost. You can return to the
programed playback by pressing the PLAY button.
<
If the power is turned off, the programed contents will be
erased.
<
When in the program mode, the following buttons don’t
work:
SHUFFLE, DISC NO., DISC SKIP
disc number
program number
track/file number
1
2
3
5
4
