ILLUSTRATION OF THE KEYS
ON THE REMOTE CONTROLLER
2
1
2
3
4
5
6
7
8
20
19
18
17
16
15
14
13
12
11
10
9
1. SCREEN ON/OFF & BRI/COL BUTTON
2. TITLE BUTTON
3. PREV/F.BWD BUTTON
4. NEXT/F.FWD BUTTON
5. NAVIGATION BUTTONS
6. NUMERIC BUTTONS
7. PROGRAM/ANGLE BUTTON
8. MUTE BUTTON
9. OPEN/CLOSE BUTTON
10. SETUP BUTTON
11. MENU BUTTON
12. DISPLAY BUTTON
13. STOP BUTTON
14. OK(PLAY/PAUSE) BUTTON
15. SUBTITLE BUTTON
16. AUDIO BUTTON
17. SEARCH BUTTON
18. REPEAT BUTTON
19. ZOOM/SLOW BUTTON
20. USB/CARD BUTTON
BASIC CONNECTION
The mains plug is used as disconnect device, the
disconnect device shall remain readily operable.
It is recommended to be connected to a multi-system TV.
Ensure that this player and other equipment to be
connected to the unit are in the standby or off mode and
disconnect the AC power cords before commencing
connection.
Do not block ventilation holes of any piece of the
equipment and arrange them so that air can circulate
freely.
Read through the instructions before connecting other
equipment.
Ensure that you observe the color coding when connecting
audio, video cables.
Note:
During DVD play, the TV volume may be at a lower level
than during TV broadcasts, etc. If this is the case, adjust
the volume to the desired level.
If the DVD/CD player is connected to the TV through a
video cassette recorder, the picture may not be played
back normally with some DVDs. If this is the case, do not
connect the player via the VCR.
Connecting to TV set
To video input connector
(yellow)
To audio input connectors
(red, white)
Video/audio cable
R L
AC power cord
To power outlet
