OPERATION OF UNIT
RADIO OPERATION
RECEPTION OF RADIO PROGRAMME
1.
Set the FUNCTION SWITCH to AM or FM position. The ON indicator will light on.
2.
Tune in a desired station by tuning the TUNING KNOB.
3.
For FM reception, pull out the antenna and adjust the direction, length and angle to have the best
reception.
4.
For AM reception, rotate the unit to have the best reception.
5.
Adjust the VOLUME KNOB for your desired listening level.
6.
To turn off the radio, set the FUNCTION SWITCH to the OFF position.
PLAYING COMPACT DISC
-
Set FUNCTION SWITCH to CD position. The ON indicator will light on.
-
Use fingertip to open the CD DOOR. Place a CD into the compact disc compartment and close the
CD DOOR. The printed label side face upward.
-
The CD TRACK DISPLAY will show the total number of tracks after a few seconds.
-
" n o " will be displayed when there is no CD inside the CD compartment.
CD-R AND CD-RW PLAYABLE
This unit can play normal audio CD, CD-R and CD-RW disc.
PLAY / PAUSE BUTTON
Press once to start playing the CD, the CD TRACK DISPLAY will show the first track and the PLAY
INDICATOR will light on. Press once again to stop playing the CD temporary. The PLAY INDICATOR will be
flashing. Press once again to resume playing.
STOP BUTTON
Press once to stop playing the CD.
SKIP UP / SEARCH FORWARD BUTTON
Press once to skip to next track. Press and hold to search for a desired position at high speed forward.
Release the button to resume normal play.
SKIP DOWN / SEARCH BACKWARD BUTTON
Press once to skip back to the beginning of the current track. Press repeatedly to go to previous track.
Press and hold to search for a desired position at high speed backward. Release the button to resume
normal play.
REPEAT BUTTON
-
Press once for single track repeat playing and the REPEAT INDICATOR will be flashing.
-
Press twice for all tracks repeat playing and the REPEAT INDICATOR will be lighting.
-
To cancel the repeat play mode, press the REPEAT BUTTON once or twice until the REPEAT
INDICATOR turn off.
To remove the CD from the unit, press STOP BUTTON and open the CD DOOR and take out the CD.
To turn off the CD playing, set the FUNCTION SWITCH to OFF position.
CD PROGRAM PLAYBACK
Programmed playback enables tracks on a disc to be played in the desired order.
1.
Press once the PROGRAM BUTTON, the PROGRAM INDICATOR and " 0 1 " will be flashing
2.
Press the "SKIP UP / SEARCH FORWARD" and / or "SKIP DOWN / SEARCH BACKWARD"
BUTTONS to select the desired track number.
3.
Press once the PROGRAM BUTTON again to memorize the track.
4.
Repeat steps 2 and 3 until all desired tracks are programmed.
5.
Press the PLAY / PAUSE BUTTON to start playing. the PROGRAM INDICATOR will light on.
6.
Press the STOP BUTTON to stop programmed playback.
7.
Press the PLAY / PAUSE BUTTON to resume programmes playback.
8.
Open the CD DOOR or turn off the CD playing to clear the programmed memory.
9.
When in stop mode, press STOP button can clear program memories also.
NOTE : Programming can only be made when the CD playing is in stop mode.
Teac CDR29A.p65
2015/9/14, 下午 03:57
4
Summary of Contents for PCD250B
Page 1: ......
