POWER SOURCE
BATTERY POWER OPERATION
1. Open the BATTERY COMPARTMENT DOOR by pushing the catches downwards.
2. Install 8 x UM2 batteries carefully as indicated in battery compartment.
3. Close the BATTERY COMPARTMENT DOOR.
AC POWER OPERATION
Connect receptacle end of the mains lead to the AC SOCKET and the plug to an AC outlet.
OPERATION OF UNIT
FUNCTION SWITCH
*
Position RADIO for :
- Radio reception
- Recording from radio
*
Position CD for :
- Playing compact disc
- Recording from compact disc
*
Position TAPE for :
- Switching off the radio and CD
- Cassette playback
SOUND ADJUSTMENT
VOLUME
The level of sound reproduced by loudspeakers or stereo headphones is adjusted by rotating the VOLUME
KNOB.
DBS
When the DBS ON/OFF SWITCH is selected to ON position, the dynamic low frequency ranges are
boosted.
NOTE
During recording, to adjust VOLUME KNOB only affects the monitor sound but not the content of recording.
RADIO OPERATION
RECEPTION OF RADIO PROGRAMME
1. Set the FUNCTION SWITCH to the RADIO position. Set the desired radio band with the BAND
SWITCH.
2. Tune in a desired station by tuning the TUNING KNOB.
3. For FM reception,
extend
the antenna and adjust the direction, length and angle to have the best
reception.
4. For AM reception, rotate the unit to have the best reception.
5. Adjust the VOLUME KNOB for your desired listening level.
6. To turn off the radio, set the FUNCTION SWITCH to the TAPE / POWER OFF position.
PLAYING COMPACT DISC
-
Set FUNCTION SWITCH to CD position.
-
Push down the CD DOOR OPEN KNOB to open the CD DOOR. Place a CD into the compact disc
compartment and close the CD DOOR.
-
The CD TRACK DISPLAY will show the total number of tracks after a few seconds.
-
" " will be displayed when there is no CD inside the CD compartment.
Teac PCD825 (AUST).p65
2004/7/27, ¤U¤È 03:14
4
