RECORDING
*
Press the STOP/EJECT button (2) and insert the cassette.
*
Set the FUNCTION SWITCH (12) to the Tape position.
*
This unit has an automatic level control (ALC) circuit and does not require any adjustment of VOLUME
button (4) while recording.
*
Press the STOP/EJECT button (2) to stop recording at any position. When the tape is wound
completely, the REC (11) and PLAY (10) buttons will be released automatically.
(A) RECORDING THROUGH THE BUILT-IN MICROPHONE
1.
Press the REC (11) and PLAY (10) buttons simultaneously.
2.
While recording, this is no need to adjust the volume control, the ALC circuit does everything.
3.
Best result will be obtained by speaking within two or three feet of the microphone to minimize
pick up of extraneous room noise.
(B) RECORDING FROM THE BUILT-IN RADIO
1.
Set the FUNCTION switch (12) to the RADIO position. Tune in a desired radio programme as
described in "Reception of Radio Programmes".
2.
Press the REC (11) and PLAY (10) buttons simultaneously.
3.
Since you can monitor throught the speakers, regardless of recording level, adjust the VOLUME
control (4) for your desired sound, during recording on AM radio, interference noise can occur which
can be reduced by replace the unit to the best position.
PAUSE BUTTON
Depress PAUSE button (3) to stop the playback or recording temporarily. Release it to resume.
PLAYBACK
Set the FUCTION switch (12) to the Tape position.
1.
Press the STOP/EJECT Button (2) and insert the recorded cassette.
2.
Press the PLAY button (10).
3.
Adjust the VOLUME control (4) for your desired sound level.
4.
Press the STOP/EJECT button (2) to stop play back at any position. When the tape is wound
completely, the play button will be released automatically.
MAINTENANCE
To ensure continued high performance from your unit, clean the heads and pinch roller periodically.
Failure to clean these parts will result in inferror sound quality, distortion of recording, deterioration of high
frequency reproduction and inconsistant tape speed.
1.
Press the STOP/EJECT button (2) and open the cassette compartment lid.
2.
Press the PLAY button (10)
3.
Moisten a cotton appicator with cleaner or alcohol and apply to the faces of both heads, rubbing gently
until all traces of dirt or oxide are removed. Also clean the surfaces of the pinch roller and the capstan.
4.
Dry, Clean and Polish the faces of the heads with piece of soft cloth.
NOMINAL SPECIFICATIONS
Power Output
: 1 Watt RMS per channel
Frequency Range
: FM 88-108 MHz
AM 531-1602 KHz
Tape Speed
: 4.75 cms per second
Wow and Flutter
: <0.35%
Frequency Response
: 125 Hz-6KHz
Dimensions
: 415(L) x 100(W) x 150(H) MM
Weight
: 1 KG
Power input
: AC240V, 50Hz , DC6V (UM1x4)
Weight and dimensions are approximate because we continually strive to improve our products,
Teac PC60 (NZ)-2.p65
2006/4/10, ¤U¤È 12:15
3
