Teac MCD65BT, User Manual

Page: 9 / 18

Setting Up
1. Connect the speaker cables to the speaker terminals.
2. Connect the black end of each wire to the terminals at the back of the main unit
that are marked “-”, and the other end to the terminals marked “+”.
Connecting the Speakers
1. Unravel and connect the included FM antenna to the FM terminal at the back
of the main unit.
2. Stretch out and position the antenna to find the best FM reception in FM Mode.
NOTES:
- If the unit is set up near a TV screen, interference may occur where the TV picture
becomes distorted. In this case, move the speakers at least 30cm away from
the screen.
- Be sure to match the speaker cables to the +/- terminals correctly. If the sound
output is distorted and lacks bass, the cords may have been reversed.
- Do not insert hands or other objects into the speaker port holes at the back of each
speaker. These holes are designed to provide good bass sound.
Connecting the FM Antenna
LINE IN AUDIO OUT
R
L
R
L
FM ANT
FR FL
SPEAKER OUT
FR FL
SPEAKER OUT
5