-11-
VIDEO SETUP PAGE:
VIDEO OUTPUT:
OFF:
Set video output to the composite.
YUV
:
Set video output in analog component video format when connecting to
Y/U/V terminals.
P-YUV
:
Set progressive YUV signals. Connection same as YUV.
Note:
:
If the video setting differs from the physical connection, the TV set may be
without picture. In case of this, you can RESET the machine, then keep pressing
key [V_MODE] until the picture is OK again.
COLOR SETTING:
COLOR SETTING
includes: SHARPNESS, BRIGHTNESS, CONTRAST,
GAMMA, HUE, SATURATION and LUMA DELAY.
Adjust each item in the Color Setting to get the suitable color output of the TV
screen.
SHARPNESS:
There are three optional output modes: HIGH\MEDIUM\LOW,
can press [enter] and [ ]and [ ] direction key to choose one.
BRIGHTNESS:
Use the [ ] or [ ] arrow button to move the scroll and adjust
the brightness.
CONTRAST:
Use the[ ] or [ ] arrow button to move the scroll and adjust the
contrast.
GAMMA:
There are four optional output modes:
HIGH\MEDIUM\LOW\NONE,can press [enter] and [ ]and [ ] direction key to
choose one.
HUE:
Use the [ ] or [ ] arrow button to move the scroll and adjust the hue.
SATURATION:
Use the [ ] or [ ] arrow button to move the scroll and adjust
the saturation.
LUMA DELAY:
Use the [ ] or [ ] arrow button to move the scroll to select
one choice: 0T or 1T.
System Setup
