3
Before use
Checking the included accessories
In the unlikely event that any of the following includ-
ed items is missing or damaged, please contact the
store where you purchased the product.
Speaker cables (2 m or 6 1/2 ft) × 2
Silicone speaker feet × 8
Owner's manual (this document) × 1
o
Keep this manual in a safe place for future
reference.
o
See pages 45–47 for information about
the warranty.
Product registration
Customers in the USA, please visit the following TEAC
website to register your TEAC product online.
http://audio.teac.com/support/registration/
Using the TEAC Global Site
You can download updates for this unit from the
TEAC Global Site:
http://teac-global.com/
1) Open the TEAC Global Site.
2) In the TEAC Downloads section, click the desired
language to open the Downloads website page
for that language.
NOTE
If the desired language does not appear, click Other
Languages.
3) Click the “Search by Model Name” section to open
the Downloads page for that product. (Users in
Europe should click the product name in the
“Products” section instead.)
4) Select and download the updates that are need-
ed.
Precautions for use
o
Do not strike the enclosure (cabinet) or front sur-
face Saran Fiber with hard objects. Doing so could
cause scratching or damage the speaker units.
o
Avoid contact with rubber and vinyl for long peri-
ods of time, because it could damage the surface.
o
Do not place cards, tapes and discs that use mag-
netic recording or other items that are easily
affected by magnetic force on top of it. Failure to
do so could result in data loss or damage.
o
Listen within an appropriate input level range
from the amplifier. Excessive input could damage
the speaker units.
Moreover, even if the input level is less than the
maximum, signals with a frequent clipping, for
example, will have a negative impact on the
speaker units. Please be careful to prevent distor-
tion of the audio at the amplifier.
Cleaning
o
When the surface becomes dirty, use a soft
dry cloth to wipe it clean. Do not wipe it with
finemeshed cleaning cloths, chemical cleaning
cloths, thinner, abrasives or similar materials.
Doing so could damage the surface.
o
Use a clothing brush or a similar tool to remove
dust that sticks to the Saran Fiber.
Summary of Contents for LS-101HR
Page 44: ...44...
