Gently open the dust cover.
1. Lift the dust cover all the way up until it stop, the cover will now stay open.
2. Remove white protective needle cover by gently pulling towards the front of the unit.
3. Release tone arm
HOLD DOWN CLIP
by gently pushing to the right. This will unlock
TONE ARM
from its arm rest. Re-lock the
HOLD DOWN CLIP
when moving the unit to
another location.
Turntable Operation
1. Press and toggle the
SOURCE
button on the front of the unit to switch to
PHONO
mode.
2. Set the
SPEED SELECTOR
to the correct speed (33, 45 or 78rpm).
3. Place the record on the turntable.
4. Move the
TONE ARM
to the desired starting point on the record. The record will start
playing.
5. Turn the
VOLUME CONTROL
to adjust the volume to the desired level.
6. Slide the
AUTO STOP CONTROL SWITCH
to choose the auto stop function.
7
NB:
Sound output of the built-in amplifier is limited, when playing records, to avoid feedback
and rumble. This is normal, so keep the volume as low as possible on the unit, and rather
increase volume on external amplifier.
. At the end of the record, the
TONE ARM
will stop automatically. You must return the
TONE ARM
to
TONE ARM REST
manually.
PHONO Operation
8
Saving an FM Radio Station
1. Follow the instructions for Tuning the FM Radio.
2. Adjust the
TUN+ /
or TUN- /
controls to tune the FM radio to the desired
station.
3. Press the
P-MODE / MEM
button on the front of unit, flash
MEM
icon and preset
number
P01
will appear on the LCD display, indicating which preset the current station
will be saved to.
4. Press the
M+ /
or
M- /
buttons to select preset number.
5. Press again the
P-MODE/MEM
button to confirm saved.
6. Repeat above steps 2 - 5 to preset up to 20 stations.
7. To retrieve one of the preset stations already programmed, press
M+ /
or
M- /
buttons repeatedly until you reach the desired program number of the station.
