Basic Operation
The following section conveys the unit’s general operation, such as, switching the unit on,
selecting the input source, and using the automated channel search command.
Switching the unit on
The following steps are a guide to switch the unit on:
1. Connect the television unit to the antenna wall socket using a coax television cable.
Connect any other external devices that will provide video input to the television.
2. Using the provided power adaptor , connect the television unit to an available power
source.
WARNING:
Make sure the power output from your power source matches the power input
labelled on the television adapter.
11
3. Flip the Power Switch on the back of the TV to the ON position. The TV will enter Standby
4. Press the POWER button on the remote control or the television panel. The TV will take a
Mode, shown by the LED indicator lighting up in red.
few seconds to start up, while the LED indicator turns green.
Selecting an input source
The unit incorporates multiple input sources which can be
selected via the
INPUT
button on the television panel or
remote control. The following steps explain the procedures
involved.
1. Press the INPUT button to enter the Input menu. The
screen will display the Input Source menu.
2. Use the CH+/- button on the TV set or /\ / \/ direction
button to select the desired input source.
3. Press OK to enter the selected source.
NOTE:
Please make sure the device is connected
before selecting the input source.
Basic Operation
OSD
Menu
Multimedia
Operation
Recording
Operation
Maintenance
and Service
Operation
Blu-ray/DVD
