4
What is Included/TV Placement Setup
TV Stand Installation/Removal
Wall Mounting
Unit and Accessories
TV Set
Remote Control
with Batteries
Base Stand
Stand Support
4 Screws
User’s Manual
FAV
OK
USER MANUAL
WARRANTY INFORMATION INSIDE. PLEASE READ
www.teac.com.au
IMPORTANT !
LED TV
Trademark of TEAC Corporation JAPAN
LE65A521
2 Screws
M4*14
2 Screws
M4*14
Four mounting holes
(size M6 screw)
400mm
400mm
The TV is provided with mounting holes for a VESA approved wall mounting bracket
(NOT SUPPLIED). The VESA mounting pattern is 400 x 400 mm. Remove the screws
holding the base to the base bracket and lift the base away (do not remove the base
mounting brackets). Mount the VESA bracket using 4 x M6 x 10 isometric threaded
screws (not supplied). Do not use screws longer than 10 mm; damage will occur to
the internal components.
Caution: Your new TV is heavy; please consult with a professional wall mount installer
WARNING: Large TVs can fall over and cause major damage injury. If you are standing
a large TV on its feet, we recommend that you fix the body of the TV to the wall using
furniture straps, so that the TV cannot be tipped over by children or pets.
to perform this installation.
NOTE: Wall hanging height of the whole machine shall not exceed 2m.
