Basic Operation
OSD Menu
Multimedia
Operation
Recording
Operation
User Guidance
Information
Maintenance
and Service
7
Fixing the stand
Top View
18
0
18
0
18
0
18
0
1. Required parts (supplied)
TV set
Stand
Screws(supplied)
4 x ST4 x 16F
Before installing the stand, please check that
you have all of the parts and that there is no
visible damage. If a part is missing or appears
damaged, please contact customer service.
2. Fixing the stand
Place the TV face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the TV.
Position the stand to the neck of the TV set as shown below.
1. Before you put on the stand, please make sure the direction is correct
as shown below.
2. When you are putting on the stand, please make sure the neck of the
TV set is in the correct position and attached tightly.
If you do not attach the stand correctly, the TV will become unstable
and may tip over.
Back
Front
Front
Attach the stand securely with the supplied screws.
Front
When attaching the stand, make sure the screws
are attached tightly.
If the screws are not attached tightly, the TV will
be unstable or may even tip over.
3. Warnings.
a. Do not tilt the screen to the front or back as
shown below. Doing so may damage the
stand.
b. The max rotation angle of the TV is 18 , as shown below.
Over-rotating the TV may damage the stand and/or neck.
0