- -
17
System Connections
Connecting to a PC
Follow the steps and figure below to connect PC to the unit.
1. Connect one end of the VGA cable to the VGA input jack on the jack panel of the unit and the
other end to the PC VGA output.
2. Connect one end of the audio cables to the PC audio input jack on the jack panel of the
television and the other end to the PC audio output jack.
3. Set the PC video resolution to match that of the television (typically 1024 x 768@60Hz).
After connection, turn on the power of the unit and the external AV signal source. Press
INPUT
then
direction buttons to select
VGA
mode, and then press the
ENTER
button to confirm.
Connecting to a TV Antenna
Connect TV signal input source from the aerial to the TV jack on the rear panel of the unit.
After connection, turn on the power of the unit. Then press the
INPUT
button and the direction
buttons to select
TV
or
DTV
mode, press the
ENTER
button to confirm and conduct program
selection.
