5
5. Press the PAIR/PLAY/PAUSE button to pause/resume the playback.
6. During playback, press the TUNE UP/DOWN button on the unit or the TUN+/- button on
the remote to skip to the next or previous track. Press and hold the TUNE UP/DOWN
button or the TUN+/- button to fast forward or rewind on the current track.
Note:
Pairing mode is canceled after about 1.5 minutes if pairing has not been completed.
For more specific instructions on Bluetooth connectivity for your audio source device,
please consult your manufacturer’s manual.
After the first connection, the unit will detect your last paired Bluetooth device and
connect to it automatically.
RECONNECTING VIA BLUETOOTH
If an audio source device is already paired with the iTB55Li, but became disconnected even
with both devices turned on, reconnect them by doing the following:
1. Press and hold the PAIR/PLAY/PAUSE button. The Bluetooth LED indicator will blink for
about 1.5 minutes while it is ready for reconnection.
2. Scan for Bluetooth devices on the audio source device and select iTB55Li on the list. The
LED Bluetooth indicator will stop blinking when the iTB55Li and the device have been
reconnected successfully.
FM RADIO OPERATION
1. Switch to TUNER (RADIO) Mode by pressing the SOURCE button repeatedly.
2. Press the TUN UP/DOWN button on the unit or the TUN+/- button on the remote to
manually adjust the frequency. Press and hold the TUN UP/DOWN or TUN +/- buttons to
auto scan for radio stations by tuning forwards or backwards respectively. (When an
available station is found, the unit will broadcast it immediately and auto scan will be
stopped).
3. In Tuner Mode, it is possible to tune into a specific frequency using numeric buttons on
the remote control. For example, press buttons 8, 9 and 8 to get to 89.8 MHz. If the
numbers keyed in are not in the valid frequency range, "ERROR" will display on the
screen.
4. During radio playback, press the ST button on the remote to switch between FM
STEREO and FM MONO modes. FM MONO may improve sound quality if the reception
is poor.
NOTE:
If the FM signal is weak or if there is background static noise, extend the FM
antenna and move it to find the best reception.
SETTING UP RADIO STATION PRESETS
1. During playback, press and hold the PAIR/PLAY/PAUSE button on the unit or press the
MEMORY button on the remote for storing the current station until a memory cell number
flashes on the screen.
2. Use the TUN UP/DOWN button on the unit or the MEM+ or MEM- button on the remote to
select the corresponding memory cell for storing the station.
3. Confirm your selection by pressing the PAIR/PLAY/PAUSE button or MEMORY button.
4. During radio playback, press the PAIR/PLAY/PAUSE button on the unit or the MEM+/-
button repeatedly to recall the stored stations.
