BASIC OPERATION
Automatic Frequency Adjustment (Seek Mode)
- Press and hold (for 2 seconds) the
TUNE+
or
TUNE-
keys to search for the next available
radio station frequency.
- When the desired station is reached, it can be saved into memory for quick access.
(See the “Radio Station Memory” section for further details.)
Radio Station Memory
- After tuning into a desired station, it can be stored into memory for quick access.
- Press the
PROG
key to go into the memory tuning stage.
- Press the
or
MEMORY-
keys to choose the desired memory storage
position you would like to save the current station into.
- Press the
PROG
key again to confirm your selection and save the station into memory.
Recalling a saved memory station
- Press the
or
MEMORY-
keys to cycle through stations saved into memory.
- To erase a saved radio station, simply overwrite it with a new station frequency in the same
memory position.
(There are 20 memory stations).
Bluetooth®
wireless playback (A2DP Wireless Audio Streaming)
This unit can wirelessly receive audio streams from devices with
Bluetooth
®
A2DP capabilities
within approx. 30 feet (10m). Simply pair your device to this unit for wireless audio playback.
How to pair your device to this unit?
- To enter
Bluetooth
®
Mode, press the
FUNCTION
key repeatedly until
“
BT
”
is on the display.
- Pressthe
DISPLAY MODE
key to see the pairing status.
Status Message
Status Description
Searching
Disconnected or waiting to be paired
Pairing
Trying to pair with your device
Connected
Successfully paired with your
Bluetooth®
device
- Enable the
Bluetooth
®
function on the device you would like to pair up (eg. your
smartphone/tablet/laptop).
- From your device's
Bluetooth
®
scanning menu, search for
“
FREESTYLER
”
& select it.
- If asked for a passcode, key in
“0000”.
- To pair your Freestyler with another device, please repeat the steps above.
NOTES:
- The Freestyler remembers up to 6 devices. While the Freestyler remembers a device, there
is no need to repeat this pairing procedure, even if the unit has been powered off.
- The Freestyler will also automatically pair with the LAST paired device if it is found when the
Freestyler is powered on and switched to
Bluetooth
®
mode.
- Only one device can be paired at any given time, but the unit will remember up to 6 devices.
Disabling
Bluetooth®
Connection:
To unpair a
Bluetooth
®
device that has already been paired, press and hold the
PAIRING
key
for a few seconds until the pairing status on display changes from “CONNECTED” to
“SEARCHING”.
4
5
