Connection
4
CAUTION
Turn off the power of all the equipment before making connections.
Read instructions of each component you intend to use with this unit.
<
Be sure to insert each plug securely. To prevent hum and noise, do not bundle the connection
cords with the power cord.
FM antenna
While in FM mode, tune in an FM station and extend the lead to find the best position for the
reception. This antenna may need to be repositioned if you move your unit to a new location.
LINE OUT jacks
You can connect this unit to an external amplifier, cassette tape deck, etc.
Connect the component with RCA pin cords. Make sure to connect the white plug to the white
jacks (Left) and the red plug to the red jacks (Right).
Note:
<
This output jack is a “line level” output. Do NOT connect to the “PHONO” jack on your amplifier or
distortion may occur.
<
The volume level of line output cannot be adjusted by the VOLUME control knob of this unit. Use
the volume control of your amplifier to adjust the volume.
AC Power Cord
Plug this AC power cord into an AC wall socket.
C
B
A
LINE IN
R L
Amplifier, Cassette Tape Deck,
CD-R, MD, etc.
C
B
A
