Installing the included software − Linux
To compile the Linux software, you must have gcc, make, binutils and
libusb 0.1.12 installed. Extract the source code from the Source_Code
directory of the included CD−ROM, cd to the backend directory and
run make, then cd to the cmd directory and run make.
To compile the GUI, you will also need GTK 1.2 or later. If you have GTK 1.2,
cd to xdib and run make. If you have GTK 2.x, cd to xdib and run
"make −f Makefile.gtk2".
To allow users in group floppy to access the FC5025, copy 025_fc5025.rules
to /etc/udev/rules.d/ and reboot.
Installing the included software − Mac OS X
To install MacDIB, navigate to the Drivers folder on the included CD−ROM,
open FC5025_MacOSX_Setup.dmg, and drag MacDIB to the Applications folder.
Optionally, you may also install the command line tools. You only need to do
this if you want to read disks from the Terminal window. To install the
command line tools, double−click FC5025 Command Line Tools (optional).pkg.
If you are running Tiger, add the following two lines to your .profile:
export PATH=$PATH:/usr/local/bin
export MANPATH=‘manpath‘:/usr/local/man
Installing the included software − Windows − See the next page
