Teac Esoteric C-03, Owner'S Manual

Page: 10 / 16

10
Settings 2
Additional settings are controlled by the following steps.
Press and hold the SETUP button for more than 2
seconds.
“Disp***” appears and the unit enters the setup mode.
Repeatedly press the SETUP button to select the menu
item to be set.
The display changes each time you press the SETUP button.
< If you leave the unit idle for 10 seconds, the setting mode will
be cancelled.
Use the INPUT buttons (</>) to select options in the
menu item.
Repeatedly press the MENU button until the display
returns to normal which exits the setup mode.
If you leave the unit idle for 10 seconds or press the CLEAR
button, the setup mode will be cancelled.
< Settings are stored even when power is turned off and the
unit is unplugged.
4
3
2
1
INPUT
CLEAR
SETUP
ON
Disp>*** (Volume display)
To select the volume display mode.
Default setting is Step.
Step
Adjustment steps from 0 to 99 are displayed.
dB
The attenuation value from the maximum level allowed is
displayed (–90.0 to 0.0). No sound (-
∞ dB) is displayed as ---.
Out>*** (Output selection)
To select which terminals outputs sound signals.
Default setting is BOTH (RCA+XLR).
BOTH (RCA+XLR)
Sound signals output from both the RCA and the XLR
terminals.
RCA
Sound signals output from the RCA1 and RCA2 terminals.
XLR
Sound signals output from the XLR terminals.
< If you do not use a set of outputs indicated above, it is
suggested that you turn off those output connectors to enjoy
an incremental improvement in sound quality.
Gain>*** (Gain selection)
To select total gain setting.
0dB
Usual setting.
+12dB
Raises gain by 12dB. Used when you want to listen to sound
loudly or when you want to use the VOLUME knob at lower
positions.
XLR1Hot>***
XLR2Hot>***
(HOT selection for XLR input terminal)
To select #2 HOT or #3 HOT for the XLR input terminal.
Default setting is 2.
2 The pin assignment of the XLR input terminal is #2 HOT.
3 The pin assignment of the XLR input terminal is #3 HOT.