DM-3200 Pro Tools
3. Channel
strips
The control target parameters as follows:
DM-3200 Pro
Tools
function
Note
Ring Encoder
Encoder
Controls operations such as Pan and Aux Send
Ring LED
Ring LED
Turns on the LED according to data sent by Pro Tools in
response to Ring encoder operation.
Rec function LED
Rec/Ready
LED
Displays each track's record status
Solo
Solo
Switches Solo on and off for each track.
Mute
Mute
Switches Mute on and off for each track.
Track fader touch
Fader touch
Sends fader touch message to Pro Tools
Track fader
Fader move
Performs Fader control.
Master fader touch
---
N/A as there is no Master module in the HUI.protocol
Master fader
---
N/A as there is no Master module in the HUI protocol.
3.1 Encoders
Target control parameters are selected using Top panel Encoder mode. By operating the encoder on
the mixer, target parameters of Pro Tools can be controlled.
Also, information on the target channels is displayed on the LCD screen.
Information displayed here comes in messages sent by Pro Tools.
Target parameters, etc displayed
Target channels, etc. displayed
3.2 Ring LED 15-dot display
While the Ring LED of the DM-3200 is made up of an array of 15 dots, HUI uses a 12-dot system.
Relationships between the two are as shown below:
DM-3200
Ring LED
HUI V pot LED
DM-3200
Ring LED
HUI V pot LED
Information displayed here comes in messages sent by Pro Tools.
DM-3200
Pro
Tools
5/8
