Teac CTH340, Owner'S Manual

Page: 12 / 15

Preset menu
Press MENU key to call up Preset menu as shown right:
The items in this Preset menu are explained in detail as follows.
'POSITION', presents the number of the current program.
'REMEMBER', is used to disable the current program, if unwanted, when changing channels with CH+/CH- keys .
'BAND', use BAND to select frequency band location of a channel for SEMI-SEARCH tuning.
'FINE TUNING', use FINE TUNING to improve image and sound quality under poor reception conditions.
'SEMI-SEARCH', SEMI-SEARCH can be used to manually tune in individual channels to a specific program number.
This function can also be used if tuning in a VCR.
'AUTO-SEARCH', the AUTO-SEARCH function will tune in automatically all channels available in your area.
Press V+ to start this process.
Note:
Please set COLOUR to AUTO and SOUND to 5.5M before starting AUTO-SEARCH.
Press the CH+/CH- keys to select the desired item and activate it with the V+/V- keys.
Basic operation
8
MENU
MENU
POSITION 1
REMEMBER ON
BAND V-L
FINE
SEMI-SEARCH
AUTO-SEARCH
PRESET
SELECT ADJUST
COLOR-SYS
AUTO
SOUND-SYS 5.5M
SHIFT MODE ON
EXCHANGE 001 - - -
COPY 001 - - -
CLEAR ALL
OPTION2
SELECT ADJUST
Press MENU key to call up option2 menu as shown right:
MENU
MENU
Press the CH+/CH- keys to select the desired item and activate it with the
VOL+/VOL- keys.
The items in this option2 menu are explained in detail as follows.
'COLOR-SYS', COLOR-SYS allows the selection of different color systems. Please set to either AUTO or PAL positions.
set it ON to display a black screen during the transition between programs when changing channels.
'SOUND-SYS', SOUND-SYS is for the selection of different sound systems. Please set to 5.5M.
'EXCHANGE', is used to exchange two position's contents.
'COPY', is used to copy previous position's contents.
'CLEAR ALL', is used to clear the programs having been stored.
Please press the V+ key for about three seconds.
'
SHIFT MODE
'
,
' '
Option2 menu
LIMIT SET
PLEASE INPUT
PASSWORD:
_ _ _ _
LIMIT SET
LIMIT TIME OFF
CHANGE PASSWORD
PLEASE INPUT
NEW PASSWORD
_ _ _ _
INPUT NEW
PASSWORD AGAIN
_ _ _ _
PASSWORD CHANGED
PLEASE REMEMBER
LIMIT SET
LIMIT TIME 00
:
10
CHANGE PASSWORD
The primary password
is '0000'.
press VOL- key to change the hour,
press VOL+ key to change the minutes.
(for example 10 minutes.)
PLEASE INPUT
PASSWORD:
_ _ _ _
LOCKED
LIMIT SET
LIMIT TIME 00
:
00
CHANGE PASSWORD
LOCKED
press VOL- key to turn off.
10 minutes later,
the screen will display 'LOCKED'
and the TV program will disappear.
Input your new password
or primary password
The time LIMIT SET function allows you
to restrict the use of the television, for
example to avoid excessive number of
watching hours by children.
This function is password protected.
The initial password is '0000' and it can be
changed following the procedure described
in the diagram. Please keep the new password
in a safe place, as you will need it in the future.