10
FM MODE
How to Switch to FM Mode?
1. Press
MODE
to switch from DAB Mode to
‘
FM Mode
’
.
How to tune to stations?
1. Once in FM mode, it will start at the beginning of the FM frequency range (87.50MHz).
Otherwise, it will play the last FM station you
’
ve listened.
2.
Manually Scan
To manually scan FM frequency, press
or
to change frequency by 0.05MHz per
step. Press and hold
or
to scan lower or higher stations
3. Automatic Scan
To automatic scan, press
or
or
SCAN
.
a. To forward auto
‘
Scanning
…
’
press
and then press
OK
.
b. To backward auto
‘
Scanning
…
’
press
and then press
OK
.
c. Or, simply press
OK
or
SCAN
.
How to Start Scan for available station?
1. By default, FM scans stop at any available station. This may result in a poor signal-to-
noise ratio (hiss) from weak stations.
2. To change the scan settings to stop only at stations with good signal strength, press
MENU
à
<
Scan setting
>
à
‘
Strong stations only?
’
press
OK
to confirm.
How to Change Audio Setting?
1. By default, all stereo stations are reproduced in stereo. For weak stations, this may result
in a poor signal-to-noise ratio (hiss).
2. To play weak stations in mono, press
MENU
à
<
Audio setting
>
à
Forced mono
,
press
OK
to confirm.
How to View Station Information?
While listening to a DAB+/FM program, you can view station information by press
INFO
repeatedly. The information is displayed on the second line of the display such as signal
strength, program type, multiplex name, frequency, digital bit rate, program format, date.
