Setting Alarm
1. Press and hold
ALARM
button on the unit and press the
HOUR
button to set the hour and press the
MIN
button to set the minute.
2. Release the buttons to confirm settings.
3. Slide the
FUNCTION
switch to
AUTO / BUZZ
to set the alarm.
4. Select
AUTO
mode to wake up by radio and select
BUZZ
mode to wake up by buzzer.
5. The
ALARM LED
will illuminate on the display once the alarm is set.
6. Slide the
MODE
button to select the wake-up mode.
7. When the alarm time is reached, depending upon your prior selection, the AM radio or FM or the
buzzer will sound.
8. If the
iPod
is selected as the wake-up mode, the buzzer will sound.
9. Press
ALARM
button to cancel the alarm and the
ALARM LED
will remain on the display and the
alarm will sound again on the next day at the same time.
10. Slide the
FUNCTION
switch to
ON / OFF
to cancel the alarm.
Snooze Function
Press
SNOOZE
button to silence the
ALARM
sound (radio / buzzer) temporarily for approximately 9
minutes. The snooze function is repeatable for 119 minutes and will automatically stop, however the
alarm remains set and activates again according to your alarm mode settings.
Sleep Function
This function switches the unit from operation mode to
STANDBY
mode after the specified time.
(Supports AM / FM mode only).
1. Press and hold the
SLEEP
button to turn the unit on and press
HOUR
and
MIN
buttons to set the
sleep time.
2. The sleep time ranged from 1 minute to 1 hour 59 minutes.
3. Having set the sleep time, press
SLEEP
button to reset the sleep time to 59 minutes.
4. Press the
SNOOZE
button to cancel
SLEEP
function.
Note:
Sleep function would not be able to turn off the iPod. In this case, once the sleep function is activated,
the speaker of the unit will mute but the iPod will keep on playing.
Dimmer Function
The brightness of the display can be controlled by sliding the
DIMMER
switch to HIGH / LOW position.
TUNER MODE
Radio Antenna
1. The FM antenna is located at the back of the unit. If FM is weak, extend the FM antenna to its full
length or try varying the position and direction of the FM antenna until you find the strongest signal.
2. The AM bar antenna is built-in inside the unit. If AM reception is weak, change the position of the
unit until the internal antenna picks up the strongest signal.
8
