RADIO OPERATION
1. Press the On/Standby Button to set the unit to Radio mode.
2. Select the AM or FM band by pressing the FM/AM Button. Then the AM or FM frequency will show on the
LED display.
3. Tune a station by pressing the Tuning Up/Down Button. Pressing either Tuning Up/Down Button for more
than 1 second to activate the automatic tuning mode. The automatic tuner will scan up or down and lock onto
the next station. If the automatic tuning does not precisely tune into a radio station, press the
Tuning Up/Down Button to adjust the tuning.
4. Adjust the volume by pressing Volume Up/Down Button.
5. To turn off the radio, press the On/Standby Button to set the unit to Standby mode.
6. After tuned into a radio station, the unit will return to show the current time instead of the radio frequency
after a few seconds.
7. If you want to check the radio frequency, press either once the Tuning Up or Tuning Down button then the
unit will show the radio frequency for a few seconds.
STORES PRESET STATIONS
Up to 10 stations (10 AM and 10 FM) can be stored in memory :
1. Under RADIO mode, select the waveband by pressing the FM/AM Button.
2. Tune to a desired station as described in previous section.
3. Press and hold the Preset/Memory Up Button for about 2 seconds then the Preset Station Number will flash.
Release the button.
4. Press once or more times the Volume Up/Down Button to select your desired Preset Station Number from
P1 to P10.
5. Press once the Preset/Memory Up Button then the Preset Station Number will stop flashing.
Now the station is stored in your desired Preset Station Number.
To replace a station stored in the memory, repeat all the stages described above. The new station will replace
the previously stored one.
To receive Preset Stations :
1. Under RADIO mode, select the waveband by pressing the FM/AM Button.
2. Press once or more times the Preset/Memory Up Button to select the desired Preset Station Number.
TO SET THE ALARM TIME AND THE ALARM MODE
Set the unit to Standby mode. You can only set the alarm time when unit is in Standby mode.
1.
Press and hold the the Alarm Button for 2 seconds Then the alarm time will be flashing. Release the button.
2.
Press the Hour Button once and repeatly to adjust the hour digit.
3.
Press the Minute Button once and repeatly to adjust the minute digit.
Note: Press and hold the Hour/Minute Button will change the digit at a fast speed.
4.
Press once again the Alarm Button when it reaches the right time. Then the alarm time will stop flashing.
The alarm time is set.
5.
Press once or more times the Alarm button to select which type of alarm you like as below :-
a)
Alarm - Indicator light on : Buzzer selected as alarm type.
b)
Alarm - Indicator light on : Radio selected as alarm type.
c)
Alarm - & Indicators both light off : No alarm selected, meaning that the unit will
not alarm when it reaches the Alarm set time.
USE THE ALARM
1.
Set the Alarm time and select alarm type as described in previous section. Make sure the Alarm indicator is
on.
2.
When it reach the alarm time, you can hear the radio or buzzer sound depending on which alarm type you
have selected before.
3.
Press once the Alarm Off Button to turn off the alarm sound then the radio or buzzer sound will be off.
Note : If you select AM or FM Radio as alarm type, make sure you have turned a desired station and a suitable
volume level before using this alarm type.
Teac CRX060 (Aust).p65
2014/3/26, ¤U¤È 05:24
6
Summary of Contents for CRX060
Page 1: ......
