Teac CRX-195, Owner'S Manual

Page: 6 / 8

5
ALARM OPERATIONS
1. Slide the POWER selector to “OFF” position.
2. Press and hold the ALARM SET button and repeatedly press the HOUR and MINUTE
button to set your desired wake up time.
3. When the wake up time is reached, the alarm will be functioning and will play for your
desired wake up source about one hour and then shut off automatically.
4. If press the ALARM SET button to stop the alarm function, the alarm remains set and
will turn the unit on again at the same time on the following day.
5. If slide the POWER selector to “OFF” position to stop the alarm function, the ALARM
indicator will turn off. The alarm remains set but the alarm will not be functioning on
the following day.
NOTE:
1. There is a PM indicator located in the top right-hand corner of the clock display. Be
sure to observe the PM indicator when setting the alarm to make sure the alarm time
is set correctly for AM or PM. If the PM indicator is 'On', the alarm time will be "PM". If
PM indicator is 'Off, then the alarm time will be "AM ".
2. Press and hold the ALARM SET button to check the wake up time.
SETTING FOR WAKE TO AM RADIO
1. After setting your desired wake up time, slide the POWER selector to “ON” position.
2. Slide the FUNCTION selector to “AM” position then rotate the TUNING knob to select
your desired station and adjust the VOLUME knob to the desired listening level.
3. Slide the POWER selector to “ALARM” position.
4. When the wake up time is reached, the radio will be turn on.
SETTING FOR WAKE TO FM RADIO
1. After setting your desired wake up time, slide the POWER selector to “ON” position.
2. Slide the FUNCTION selector to “FM” position then rotate the TUNING knob to select
your desired station and adjust the VOLUME knob to the desired listening level.
3. Slide the POWER selector to “ALARM” position.
4. When the wake up time is reached, the radio will be turn on.
SETTING FOR WAKE TO BUZZER
1. After setting your desired wake up time, slide the POWER selector to “ALARM”
position.
2. Slide the FUNCTION selector to “BUZZER” position.
3. When the wake up time is reached, the buzzer will be sounding.