39
Message list
Operation messages
No Disc
No disc has been loaded.
Reading
A disc is being read.
EJECT
A disc is being ejected.
No Signal
The USB/OPTICAL input is not receiving an input signal.
Connected
The USB input is connected to a computer.
Fs: *** kHz
This shows the sampling frequency (Fs) of the track playing through the USB or OPTICAL input.
AUTO POWER SAVE
This appears 30 seconds before the automatic power saving function puts the unit into
standby.
Error messages
Disc Error
The loaded disc has a scratch or other defect or it does not comply with standards.
Not Support
Playback of the loaded disc is not supported.
OVER LOAD
A problem occurred with speaker output. Turn off the power and check the connections.
Summary of Contents for cr-h101dab
Page 1: ...Z CR H101DAB CD Receiver REFERENCE MANUAL...
Page 42: ...42...
