Teac cr-h101dab, Reference Manual

Page: 7 / 44

7
Setting the clock Before use
This unit has a clock built-in.
After completing connections, set the current time.
The time appears on the display when, for example, the unit
is in standby mode.
o
See “Set clock (time settings)” on page 38 for how to
set the clock.
Example of display when in standby
T AM 09:18
Current time
Appears when the on/off timer is on
o
The clock will be reset if the unit's power cord is discon-
nected from an outlet. Reset the current time when you
use the unit.
o
The clock is not perfectly precise, so we recommend
resetting the time occasionally.
Adjusting the clock automatically
The clock setting of this unit can be automatically adjusted
by DAB or RDS clock time (CT) data it receives.
To turn on/off DAB or RDS automatic clock adjustment,
select DAB or RDS as the playback source for the one
you want to set (page 17) and hold down the RDS
button for at least 8 seconds.
Display
example
DAB DAB CT on
FM CT off
o
DAB and RDS CT automatic clock settings cannot both
be enabled at the same time. If you enable one, the
other will be automatically disabled.
o
If automatic clock adjustment is on, the unit adjusts its
clock when that type of CT data is received, regardless of
whether DAB or RDS mode is selected.
If you tune in a DAB/RDS station that is broadcasting incor-
rect CT data, the clock might be incorrectly adjusted. This
could eventually affect timer operation.
If you do not want the clock of this unit to be set by received
DAB/RDS CT data, turn off automatic clock adjustment for
that type of data.
V
Placement of the unit
o
Avoid placing it in high temperature environments
such as in direct sunlight or close to a source of heat.
Moreover, do not place the unit on an amplifier or any
other device that generates heat. Doing so could cause
discoloration, deformation or malfunction.
o
Do not place anything on top of the unit. Do not put
cloth on top of the unit or place it on top of bedding or
thick carpet.
Maintenance
Wipe dirt from the top cover and other panel surfaces using
a soft cloth that has been slightly dampened with a diluted
neutral cleanser.
Do not use chemically-treated wipes, thinner or similar sub-
stances because they could damage the surface of the unit.
V
For safety, disconnect the power cord from
the outlet before cleaning.