Teac CD-R-Dupli-4, User Manual

Page: 18 / 34

46
ENGLISH
that the CD-R-Dupli-4 is not subjected to vibration or mechani-
cal shocks.
1. Press the MODE key until the display appears as below (the 12x
may also read 8x, 4x, 2x or 1x, and indicates the speed at which the
copy will be made – see
3.6 „Setting the Writing Speed“ below).
2. Press the ENTER key.
3. Place the source disc in the MASTER disc tray, and a blank CD-R
disc in the SLAVE disc tray. If you decide that you do not want to
make a copy at this stage, press the MODE key to return to the
mode selection menu.
4. Press ENTER to start the copy operation. If you have not closed
the disc tray(s), they will close automatically, and the CD-R-Dupli-
4 will start to read the master disc and check the slave discs. The
words
Please wait... Please wait... Please wait... Please wait... Please wait...
will appear on the screen while the
discs are checked.
If the CD-R-Dupli-4 does not detect any potential problems with
the discs, copying will start, and the percentage which has been
written is shown on the display, along with an animated display to
indicate that writing is currently in progress:
5. After the percentage counter reaches 99, the CD-R-Dupli-4 writes
the TOC to the slave disc, and the display shows:
Copy (12x) Copy (12x) Copy (12x) Copy (12x) Copy (12x)
Ready ? Ready ? Ready ? Ready ? Ready ?
Mode select Mode select Mode select Mode select Mode select
1 Copy (12x) 1 Copy (12x)
1 Copy (12x) 1 Copy (12x)
1 Copy (12x)
Writing Writing Writing Writing Writing
7% 7% 7% 7% 7%
Writing Writing Writing Writing Writing
Finalizing ... Finalizing ... Finalizing ... Finalizing ... Finalizing ...
3. Modes