Teac CD-R Dupli 14/40 User Manual Download

Page: 59 / 66

123

ENGLISH

5. TROUBLESHOOTING

5.1 About LCD

After powering on if there is no LCD, please check if the connection of
power cord is firm and the environment of power outlet is normal.

5.2 About Error Messages

During Copy, Test, Compare and Verify, etc. if you press ESC to abort,
an error message will appear on LCD. Abortion may cause the
CopyStation to hang up, therefore you have to power on again.

If reading fails, an error message will appear on LCD. Please get a new
source DVD/CD to try again.

If the CopyStation hasn’t detected any device after powering on, an
error message will appear on LCD.

5.3 About DVD/CD Writer

If a source drive or DVD/CD Writers cannot read, please confirm the
format of the source DVD/CD and check if it is damaged.

Use any DVD/CD writer to read the source DVD/CD. If it works, the
source drive is probably defective or not compatible with the source
DVD/CD.

Use a fine DVD/CD Writer as the data reader, and set the “Read Speed”
at minimum.

5. Troubleshooting

Summary of Contents for CD-R Dupli 14/40



































































Search results

Summary of Contents for CD-R Dupli 14/40

Reviews:

Related manuals for CD-R Dupli 14/40

Brands by name

Popular brands

Teac CD-R Dupli 14/40, User Manual

Search results

Summary of Contents for CD-R Dupli 14/40

Reviews:

Related manuals for CD-R Dupli 14/40

Brands by name

Popular brands