5
EN
GL
IS
H
Discs
Discs which can be played in this unit:
M
Conventional audio CDs bearing the COMPACT DISC DIGITAL
AUDIO logo on the label.
M
Properly finalized CD-R and CD-RW discs
M
MP3/WMA CDs
Note:
<
Depending on the quality of the disc and/or the condition of the
recording, some CD-R/CD-RW discs may not be playable.
<
Copy-protected discs and other discs which do not conform to the
CD standard may not play back correctly in this player. If you use
such discs in this unit, TEAC Corporation and its subsidiaries cannot
be responsible for any consequences or guarantee the quality of
reproduction. If you experience problems with such non-standard
discs, you should contact the producers of the disc.
<
Always place the disc on the disc tray with the label side facing up.
(Compact discs can be played or recorded only on one side.)
<
To remove a disc from its storage case, press down on the center of
the case and lift the disc out, holding it carefully by the edges.
<
If the disc becomes dirty, wipe the surface radially from the center
hole outward towards the outer edge with a soft, dry cloth.
<
Never use chemicals such as record sprays, antistatic sprays or fluid
or thinner to clean the discs. Such chemicals will do irreparable
damage to the disc’s plastic surface.
<
Discs should be returned to their cases after use to avoid dust and
scratches that could cause the laser pickup to ”skip”.
<
Do not expose discs to direct sunlight or high humidity and
temperature for extended periods. Long exposure to high
temperatures will warp the disc.
<
Do not play any disc that is warped, deformed or damaged.
Playing such discs may cause irreparable damage to the playing
mechanisms.
<
CD-R and CD-RW discs are more sensitive to the effects of heat
and ultraviolet rays than ordinary CDs. It is important that they are
stored in a location where direct sunlight will not shine on them,
and which is away from sources of heat such as radiators or heat-
generating electrical devices.
<
Printable CD-R and CD-RW discs are not recommended, as the
label side might be sticky and damage the unit.
<
Do not stick papers or protective sheets on the discs and do not
use any protective coating sprays.
<
Use a soft, oil-based felt-tipped pen to write information on the
label side. Never use a ball-point or hard-tipped pen, as this may
cause damage to the recorded side.
<
Never use a stabilizer. Using commercially available CD stabilizers
with this unit will damage the mechanisms and cause them to
malfunction.
<
Do not use irregularly shaped CDs (octagonal, heart shaped,
business card size, etc.). CDs of this sort may damage the unit.
<
If you are in any doubt as to the care and handling of a CD-R/
CD-RW disc, read the precautions supplied with the disc, or contact
the disc manufacturer directly.
