35
ENGLISH
4. Installation
Caution:
(1) Since Windows NT 4.0 does not conform to hot swapping,
be sure to insert the PC card before turning on the power of
your PC.
(2) Set the PC card slot mode to PCIC Compatible if such set-
ting is possible. Refer to the instruction manual of your PC
for the setting method.
(3) SP4 or more for Windows 4.0 is required. (SP4 = Service
Pack 4).
When the Connected CD-ROM drive is not Recognized
1. Check the cable and the connection.
2. Check if the power is turned on.
3. A resource conflict may be the cause. Attempt to change resources
referring to Changing resources below.
Caution:
To change the values of ressources you must be logged in with
an Windows NT 4.0 administrator account usually.
4.5. Important Instructions for Users of Win 3.1/MS-DOS
As far as Windows 3.1 and MS-DOS are concerned installations are
normally carried out under MS-DOS. Installaing basically means to
install the driver of your PCMCIA card correctly. Please refer to the
documentation of your PCMCIA card, your DOS manuals, and the
manual of your notebook computer for further details.
To insert/remove the PCMCIA card your notebook computer has to be
switched off. After inserting the card the notebook PC may be switched
on. If the driver of your PCMCIA card is loaded correctly the operating
system will recognize automatically the TEAC CD-224PE. Now it may
be used under MS-DOS and Windows 3.1 without any limitations.