4
Place the VR-24 on top of the BU-VR24, and connect the con-
nection cable to the BU-VR24 connector.
Connector
Opening
o
Thread the connection cable through the opening.
5
Attach the included connection panels using screws.
Use the screws removed from the side panels (8) and the connecting panel
screws (4).
o
Tighten the screws with a torque of 60 N·cm (6 kgf·cm).
Connecting panel (left)
Connecting panel (right)
6
This completes assembly. Confirm that assembly is correct
as shown in the following illustrations.
Left side
Right side
Installing and removing batteries
Screw A
Screw A
1
Loosen the two screws (A) on the right side and open the
cover.
2
Insert the batteries (2) in the direction shown by the arrows
on them.
3
While pushing the batteries in, close the cover and tighten
the two screws (A) to fix it in place.
o
Follow these procedures in reverse to remove the batteries.
Specifications
Batteries used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NP-L7S made by IDX Company, Ltd.
Number of batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 (sold separately)
Nominal voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DC 14.8 V
External dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260 (W) × 186 (D) × 39 (H) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .about 1.6 kg
Continuous operation time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . about 3 hours
(This estimate is based on standard operating conditions set by our company at
room temperature. The continuous operating time will vary according to the use
environment and operating mode.)
186
(39)
260
125.5
(2.5)
o
In order to improve the products, specifications and appearance could be
changed at any time without warning.
o
Weight and dimensions are approximate.
o
Illustrations in this document might differ in part from the actual products.
Contact information
TEAC CORPORATION
1-47 Ochiai, Tama-shi, Tokyo 206-8530, Japan
Phone: +81-42-356-9154
TEAC AMERICA, INC.
10410 Pioneer Blvd. Suite #1, Santa Fe Springs, California 90670, U.S.A
Phone: +1-323-726-0303
TEAC EUROPE GmbH. (EU Importer)
Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany
Phone: +49-(0)611-7158-349
TEAC SALES & TRADING (ShenZhen) CO., LTD.
Room 817, Xinian Center A, Tairan Nine Road West, Shennan Road, Futian District,
Shenzhen, Guangdong Province 518040, China
Phone: +86-755-88311561-2
0919 MA–2187B